banner-mountainslake.jpg 

Full Locksmith course.
This is a full locksmith course, which is all you will need to start your locksmith business. Listed below are descriptions of all seven video courses.

1.
Lock Rekeying Course.
2. Lock Picking Course.
3. Code Cutting and Key Duplication Course.
4. Learn The Locksmith Business Course.
5. The Art of Impressioning Course.
6. Commercial Master Keying Course.
7. Safe Combination Changing Course.
Included is the Inventory, tool, and supply list.

Lock Rekeying Course
1. Lock Cylinder Removal and Assembly
In this segment, we cover the cylinder removal and assembly of a wide variety of common residential locksets.

2. Using Shim Stock.
This section covers the proper use of shim stock in the cylinder removal process; in addition we cover other methods of removing the plug when the old key is not available.

3. Pinning Up Kwikset and Weslock.
In this segment, we cover the Kwikset and Westlock brands in depth, (two of the most common brands found in over 85% of the homes in the US today).

4. Using the LAB Multi-Pin Kit.
This section covers the use of the LAB multi pin kit and its 20 pinning charts.

5. Tips and Tricks.
This is one of the most valuable segments in this series. It covers 30 years of my own experience of tips and tricks that will save you lots of time.


Lock Picking Course

1. Lock Cylinder Design
In this first segment, we look at the inside of various lock cylinders, giving you a good understanding of how most standard locks function on the inside. It is important to have this understanding before one can effectively begin the process of picking a lock.

2. Lock Preparation
In this segment we establish some guidelines for pre pairing the lock cylinder for picking. And give a brief description of each of the nine tools in the HPC-15 pick set.

3. Picking Techniques
There are only a handfull of various techniques used to open almost any lock. In this section we will be covering each of them. There is also a "what if I cant pick it" section. Some locksmiths would like you to believe they are a cross between James Bond and Houdini, but that's not the Real World.

4. Pick Selection
In this segment, we go through the process of choosing the proper picks and tension wrench used in the picking process based on the various types of lock cylinders. This section is critical to your success.

5. Plug Spinner Function
In this segment, we cover the proper use and function of the RY57 Plug spinner.

6. Pick Gun Techniques
There are as many techniques in properly using a Pick gun as there are in using a pick set. They are all
covered in this segment.


7. Real World Locksmiths
Most instructional videos have very little real-world environment footage. In section seven of this video we take all of the tools shown on this video and give them to various locksmiths, with no prior coaxing they are asked to pick various locks. You will see that every locksmith has his own style, but all use the basic techniques taught in this video.


Code Cutting and Key Duplication Course

Learn to code cut keys on your standard key machine using depth keys. Depth keys enable you to code cut keys to master key systems, file cabinet locks and many other types of locks without having an expensive code machine, also covered in this course is the HPC 1200MC code machine, one of the finest code machines on the market to day.


Learn The Locksmith Business Course

This course is a must. It is packed with marketing tips, available courses, how to set up a mobile van and much more. Ninety percent of the success of any business is knowing what not to do. Everything from purchasing the wrong inventory or tools to staying away from certain advertising that does not produce jobs. The information on this tape spans some thirty years of experience in the locksmith business; just the marketing tips alone are worth the cost.


The Art of Impressioning Course
Impressioning is the method used to make a key for a lock using just a blank key and a file. This is a true art, and a required skill in becoming a first-class Locksmith. The art of Impressioning, when learned properly, will be an asset to you throughout your entire career. This course clearly shows you the tools you will need and the various methods used in key Impressioning. This is a skill used extensively in making keys to cars, file cabinet locks; virtually all wafer and pin tumbler locks and will save you an enormous amount of time and money.

Commercial Master Keying Course "Two Video CDs"
Commercial Master Keying is probably the biggest money maker in locksmithing. Locksmiths

rk4.jpg - 5546 Bytes
rk2.jpg - 5743 Bytes
rk3.jpg - 5045 Bytes
rk3.jpg - 5045 Bytes

This is our complete Locksmith course. An inventory, tool and supply list is included with your course, along with the name of a good suppplier for these items.

All of the Photos on this page are actual still shots from our videos.

rk2.jpg - 5743 Bytes rk4.jpg - 5546 Bytes rk2.jpg - 5743 Bytes rk3.jpg - 5045 Bytes rk3.jpg - 5045 Bytes
lpall1.jpg - 10976 Bytes
biz1.jpg - 8220 Bytes KD_1.jpg - 9422 Bytes biz4.jpg - 9247 Bytes KD_3.jpg - 8278 Bytes KD_2.jpg - 8477 Bytes
DEMO

You may download a short sample of our lock picking course by clicking the camera to your left.
1. Right click on the camera.
2. Left click on "Save Target as....." The file name is pickdemo.mpeg.

Free media player click here

NOTE: Save this file in a directory easy for you to find. Once downloaded, go to its directory
and double click the file. Make sure your Windows Media player is set to play .mpeg files.
If you are still having trouble, download the free Zoom media player to your left "cool player".



Safe Combination Changing Course

This safe combination changing course is a must for the serious locksmith. Virtually all companies have one or more safes and have them changed quite frequently. The charge to recombo a safe ranges from $55.00 to $75.00 per safe dial and takes about 5 min. This course teaches you to change safe combinations with the Key Dex safe-change-key-set, as well as hand changing safe combos.


Locksmith Inventory Tools and Supply List

When starting out in the locksmith business it is vital to know what inventory and tools you should have on your van, and what quantities. This will save you an enormous amount of money by not purchasing unnecessary inventory or purchasing to many of one product. This list is very extensive; it covers every thing from cam locks to key blanks. Knowing the proper equipment as well enables you to do jobs quickly and efficiently. The accuracy of this list stems from my personal experience of some thirty years as a Locksmith. Half the battle is knowing what and what not to purchase and what quantities. When I first started out in this business a list like this could have saved me plenty. In hindsight its value would have been in the hundreds, this list is included with this course.


http://www.shopsite.com/cc_101.html


PRODUCT: #108 Full Locksmith Course -- $885.00 $395.00
3.gif  dotclear.gif